| Firsttechtools.com
Pro Link Application Cards Please Contact Us for Prices |
| PN 201047 LIGHT & MEDIUM DUTY
TRUCK CARTRIDGE SOFTWARE FOR OBD II, GM AND FORD ENHANCED DATA FEATURES OBD II generic support for foreign and domestic vehicles that meet SAE J1850 standards Enhanced coverage for engine, transmission, ABS, and airbag systems include the following: Ford 1981-2001 Gas Trucks Ford 1989-2001 Power Stroke Diesel Trucks GM 1983-2001 Gas Trucks GM 1989-2001 Diesel Trucks GM TopKick/Kodiak Gas Trucks GM DuraMax Diesel Engine Allison LCT 1000 Transmission (5-speed) Includes PN 201047 cartridge, PN 403013C GM/Ford OBD II adapter ,Manual |
| PN 209005 OBDII/GFC CARTRIDGE
OBD II Generic Data (all 1996-2003, J1850 and ISO 9141 compliant vehicles)
Enhanced diagnostic coverage for GM, Ford and Chrysler automotive; light
and medium duty trucks 1981-2000 GM model year coverage 1981-1999 Ford
model year coverage 1983-1999 Chrysler model year coverage Engine,
transmission, body, airbag and ABS support Defined diagnostic codes, data
lists and test functions Isolate intermittent problems with snapshot mode
recording and playback Print data and test results Includes
PN 209005 cartridge PN 403013C GM/Ford OBD II adapter PN 406006 Chrysler
OBD II adapter ,Manual Requires these Cables 401003,401008,407013 |
| PN 801007 ALLISON OFF-HIGHWAY CEC 1 & 2 TRANSMISSION SYSTEMS APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS This application is compatible with CEC systems used on M/S 5610, M/S 6610, M/S 8610, M/S 9610 and S 9810 models. The application also contains coverage for Allison’s Commercial Electronic Control (CEC1) units on applicable MT, HT, V730, CLBT and DP models REPROGRAM THE FOLLOWING Change the I/O state package number Enable and disable I/O wire states View and change Customer Modifiable Constants (CMCs) Change ECU password ADDITIONAL FEATURES View diagnostic data list Display active and inactive codes Clear active and inactive codes View shift inhibitors Enable clutch test to perform clutch pressure test or stall test Reset throttle calibration to ensure proper TPS adjustment Reset autodetect to verify presence of Throttle Position Sensor (TPS) Perform snapshot data recording and playback to capture intermittent problems Display I/O wire assignments and functions (enabled/disabled) View ECU EEPROM calibration configuration PN 801007 INCLUDES ,Application card, Manual Requires these Cables 404024,408050 |
| PN 801009 ALLISON OFF-HIGHWAY CEC 1 & 2 TRANSMISSION SYSTEMS APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS This application is compatible with CEC systems used on M/S 5610, M/S 6610, M/S 8610, M/S 9610 and S 9810 models. The application also contains coverage for Allison’s Commercial Electronic Control (CEC1) units on applicable MT, HT, V730, CLBT and DP models. KEY FEATURES View diagnostic data list Display active and inactive codes Clear active and inactive codes View shift inhibitors Enable clutch test to perform clutch pressure test or stall test Reset throttle calibration to ensure proper TPS adjustment Reset autodetect to verify presence of Throttle Position Sensor (TPS) Perform snapshot data recording and playback to capture intermittent problems Display I/O wire assignments and functions (enabled/disabled) View ECU EEPROM calibration configuration PN 801009 INCLUDES ,Application card,Manual Requires these Cables 404024,408050 |
| PN 801017 ZF MERITOR TRANSMISSIONS APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS KEY FEATURES Specifically designed to electronically diagnose components of the ZF Meritor FreedomLine transmission through the use of the Pro-Link Plus (sold separately) Employs the SAE J1587 protocol to communicate with the ZF Meritor Transmission Electronic Controller (ZMTEC) View: Data list parameters Transmission, engine, and ABS fault codes ,TCU information, Transmission system configuration Resides on ZF Meritor’s existing PCMCIA application card ESS DATA DISPLAY Model number Serial number Calibration ID Shift knob status ESS enable Neutral switch In gear switch System switch Shift intent switch Brake torque switch Solenoid fault TCU voltage Output RPM Engine RPM Axle ratio Axle ratio learn Transmission oil level Transmission oil temp ESS COMPONENT TESTS System self test, Reset TCU Range ,solenoid tests ESS SET OPTIONS Axle ratio Axle ratio learn ESS enable/disable Engine brake shift enable Late change enable Second change enable Skip shift enable SureShift COMPONENT Solenoid tests ,Reset TCU SureShift SET OPTIONS Axle ratio ,Engine brake SureShift DATA DISPLAY Shift lever Function button Neutral button Shift module data Clutch status Fork engage solenoids Rail select solenoids Hi/low range solenoids Trans gear position Trans rail position Trans range position Gear counts Rail counts Range counts Main counter shaft speed Engine speed Trans output shaft speed Gear selected Gear attained TCU voltage Analog input #1 voltage Transmission oil level Transmission oil temp PN 801017 INCLUDES ,Application card ,Manual Requires these Cables 404024,408028 or 408050 |
| PN 802025 MERITOR WABCO HYDRAULIC
ABS APPLICATION FOR THE MPC AND PRO-LINK PLUS Simplifies ABS diagnosis by putting the data you need in the palm of your hand Quickly access comprehensive OEM proprietary data and test functions Display fault codes, data values and actuate ABS devices Take anywhere and begin diagnosing in seconds Easy menu navigation to get the information you need quickly Reduces diagnostic time and potential vehicle down time Snapshot data recording and playback identifies drive-ability and intermittent problems Ensures confidence that brakes are safe and operational KEY FEATURES Access ECU program ID information including: ECU type Part number Manufacturer’s date Serial number Software revision View text descriptions of active and stored fault codes Clear fault codes Display data list parameters including: Individual wheel sensor speeds and voltages ABS switch status Pump relay voltage Battery voltage Retarder relay voltage Channel project number Lamp output voltage Safety project number ABS warning lamp status Channel version number ABS brake control status Safety version number ABS retarder control status Test functions include: Activate/Actuate individual modulator inlets and outlets Pump relay, retarder relay and valve relay Clamp control circuit Turn ABS warning lamp On/Off Reset retarder relay status INCLUDES Application card Manual Requires these Cables 404024,408028 or 408050 |
| PN 801013 BENDIX ABS/ATC SYSTEMS APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS KEY FEATURES Bendix tractor and trailer support ,End of line test ,,Loaded voltage test Trailer odometer reading/setting J1939 datalink status, Modify ECU configuration:, trailer ABS setting ,J1587/J1708/J2497/J1939 broadcast options Power Line Carrier (PLC) ,Test application for trailer ABS PN 801013 INCLUDES Application card ,Manual Requires these Cables 404024,408028 or 408050 PCMCIA UPDATE The Bendix ABS/ATC application software provides the capability to test and diagnose vehicles using EC-15, EC-16, EC-17 and EC-30/30T (Tractor and Trailer) Bendix systems. To address advanced capabilities provided by Bendix, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Bendix. The following list contains all of the features and functions available with this card. FUNCTIONS Display fault codes Display front, middle and rear MPH Check battery voltage Check warning and traction lamps Check engine and retarder datalink Check retarder relay End of line test Runs ABS system component tests System configuration adjusts tire size Change settings of system parameters Clears active and history faults Snapshot mode for capturing intermittent problems Create custom data lists Printer output capabilities Bendix ABS/ATC update PCMCIA card floppy disk – PN 801013F |
| PN 801111 MACK V-MAC III STEP 8 v6.1 APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS SYSTEMS COVERED Mack Truck V-MAC III vehicle management systems KEY FEATURES Fault reporter Fault reporter advanced setup Enable predictive oil change Display MID130 transmission faults Park brake 2 switch status Washer fluid level status Enable/disable cruise control Updated smart fan clutch programming Guard dog reprogrammable parameters MONITOR PARAMETERS Vehicle ECU and engine ECU data FAULT CODES Monitor and clear fault codes- VECU, EECU DIAGNOSTIC TOOLS Vehicle information Switch status Vehicle life/trip data -display and reset Vehicle maintenance monitoring/programming ,VIP display settings, CUSTOMER PROGRAMMING EECU customer data Unit pump calibration VECU general and vocational speed features Shutdown and cruise control parameters Hand throttle parameters PTO parameters Vehicle and fleet data Driver ID list Cab fan controls VECU DATE/ TIME SET LOW IDLE ADJUSTMENT GOVERNOR TYPE SETTING SYSTEM TESTS Chassis dyno mode Engine brake test Wiggle wire test Engine compression test Engine run-up test Cylinder cutout test Cylinder balance test Engine speed Road speed Engine load Throttle position Coolant temperature Coolant level Oil pressure Manifold air temperature Switch status PTO status Road speed limit status Idle engine speed Cab temperature Exhaust temperature Transmission oil temperature Fuel level Date Clock Oil level Oil temperature Fuel rate Fuel temperature Boost pressure PN 801111 INCLUDES Application card ,Manual Requires these Cables 404024,408028 or 408050 |
| PN 802001 DANA/EATON ROADRANGER
SUITE v2.9 APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS SYSTEM COVERAGE Eaton AutoShift/AutoSelect GEN 1 Eaton ABS -Anti-lock brake system Dana TMS - Tire management system Eaton VORAD CWS Eaton Top 2 Ceemat transmission Power Line Carrier (PLC) Test application for trailer ABS KEY FEATURES EATON AUTOSHIFT/AUTOSELECT GEN 1 Display and clear active intermittent fault codes Monitor AutoShift/AutoSelect system data Displays: Transmission make Model Serial number System application System configuration Transmission application Transmission configuration PN 802001 INCLUDES Application card ,Manual Requires these Cables 404024,408028 or 408050 PCMCIA UPDATE The Roadranger application software provides coverage for Roadranger
products including Eaton ABS and electronic transmissions, the VORAD
collision warning system, and Dana Tire Management Systems. To address
advanced capabilities provided by the Roadranger products the MPC uses a
PCMCIA card. The card is plugged into the back of the unit and provides
additional information unique to Dana/Eaton products. |
| PN 802002 EATON VORAD EVIMS DATA
EXTRACTION KIT DESCRIPTION APPLICATION KIT FOR THE MPC AND PRO-LINK PLUS NEXIQ Technologies Eaton VORAD EVIMS Data Extraction application for the Pro-Link Plus provides fleets with the ability to obtain trip data from the Eaton VORAD Collision Warning System. The trip data can be stored onto the PCMCIA card for multiple vehicles and then downloaded to a PC. Vehicle data and trip reports may then be viewed using Eaton Vorad EVIMS software Eaton VORAD EVIMS software allows the fleet to compare individual driver and vehicle performance to fleet averages and provides a means of improving fleet safety. It contains features and information on vehicle and driver performance such as: Trip recorder Braking & fuel economy Following distance and time Hard braking High and average speeds Time on brake Exception reports slow traffic BENEFITS NEXIQ’s Eaton Vorad Data Extraction card when used with the EVIMS PC application provides these benefits: A low cost method for transferring driver and vehicle information to the PC running EVIMS using your Pro-Link Provides a more efficient product than Segment Memory Cards User-friendly PC application to download the EVIMS data from the Pro-Link to the PC Pro-Link retains data extracted from the vehicle until data is confirmed transferred to the computer Utilizes the industry standard shop tool and minimizes “retraining” on a different tool Provides necessary unique data to manage drivers and their performance, in order to reduce accidents and truck maintenance KEY FEATURES Capability to extract Eaton Vehicle Information Management System (EVIMS) data from the Eaton VORAD Collision Warning System (CWS) Transfer stored files from the Pro-Link Plus PCMCIA card to PC 384K of memory available on card to store numerous trips prior to downloading Unique file name creation for each monitored vehicle Easy-to-follow, on-screen instructions for transferring files to the PC PN 802002 INCLUDES Application card EVIMS upload software CD 8’ PC terminal cable with DB25/9 adapter Manual Requires these Cables 404024,408028 or 408050 |
| PN 802008 HEAVY DUTY STANDARD APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS The Heavy-Duty Standard Diagnostic system application provides the functions necessary to diagnose most SAE/TMC J1708/J1587 electronic control system/engine, transmission, brakes, instruments and emissions. To address advanced capabilities provided by this application, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions. The following list contains all of the features and functions available with this card. SYSTEMS COVERED Non-proprietary J1587/1708 heavy duty vehicle coverage for: Allison Transmissions ,Bendix, Caterpillar Cummins, Detroit Diesel, Eaton ,Freightliner, International, Isuzu, Mack trucks ,Meritor WABCO Volvo ZF Meritor KEY FEATURES Display diagnostic codes and MIDs received Simple menus direct the technician through diagnostic functions Display trip data NEW FEATURES Display parameter description and values in English or metric units Display diagnostic codes and MIDs received Display trip data Snapshot modes for recording data triggered by any key, any trouble code or specific PID/SID for capturing intermittent problems Programmed with simple menus to easily navigate technicians through a variety of diagnostic functions Create custom data lists or select and hold specific lines of data for comparison of related parameters J1708 to PC Link feature allows the Pro-Link Plus to be connected to a personal computer Printer Output allows you to print truck data list, diagnostic, codes, trip information or snapshot data Terminal Output (VT Pro-Link) allows you to display Pro-Link information on a PC terminal screen DIAGNOSTIC FUNCTIONS Active codes Maximum road speed Road speed status/MPH Cruise active Cruise switch Cruise set/coast/resume/accel/brake/clutch switches Cruise set MPH Cruise high limit MPH PTO active PTO control switch PTO set/coast/resume/brake/clutch switches Engine load Barometric pressure PSI Governor droop RPM Rated engine horsepower Battery volts Fuel and oil temperatures Fuel rate GPH/total gallons PTO set/idle/engine RPM Change reference number Component make Model number Engine/PTO hoursPN 802008 INCLUDES Application card ,Manual Requires these Cables 404024,408028 or 408050 |
| PN 802031 DETROIT DIESEL MBE
900/4000 ON HIGHWAY APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS The Detroit Diesel MBE application software provides the capability to diagnose and change selected parameters on Detroit Diesel MBE 900 and 4000 electronic systems. To address advanced capabilities provided by Detroit Diesel, the MBE diagnostic application is stored on a PCMCIA card for use with the Pro-Link scan tool’s Multi Protocol Cartridge (MPC). The card inserts into the MPC, and provides functions unique to the Mercedes Benz Engine systems. Simple menus allow technicians to easily navigate through a variety of diagnostic functions. It provides access to a full range of comprehensive OEM proprietary data and tests for maintaining top vehicle performance and keeping it on the road. The following list contains many of the features and functions available with this card. This release supports VCU software through version 12.XX and PLC software through version 6.0. KEY FEATURES View MBE Data List Temperatures Pressures Switch Status Basic Trip & Life to Date Data Diagnostic Codes Read Active Codes Read Inactive Codes Clear Inactive Codes View Configuration Parameters Starter Lockout RQV (Torque Limit) ABS/ATC Type Fan Configuration PTO Function Accelerator Pedal Input Configuration Fleet Management Change Basic Parameter Settings Idle/PTO Shutdown Engine Protection Engine Brake Cruise Control Limiters Fast Idle Service Diagnostic Routines Sensor Voltages Cylinder Cut Off Compression Test Standard Pro-Link Features Create Snapshots Complete Pro-Link Printer Support Choose between Metric and English Units PN 802031 INCLUDES Application card ,Manual Requires these Cables 404024,408028 or 408050 |
| PN 802115 DETROIT DIESEL
APPLICATION SUITE 8.1 DESCRIPTION APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS The Detroit Diesel application software provides the capability to reprogram and diagnose Detroit Diesel DDEC III and IV electronic systems. To address advanced capabilities provided by Detroit Diesel, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Detroit Diesel. The following list contains all of the features and functions available with this card. NEW FEATURES Covers diagnostics for DDEC ECM firmware through version R33 for complete support of fault code data Enhanced EGR diagnostic support Fault code date and time logging 2nd page fault data supported for active faults ECM date and time display Progressive shift parameters ADDITIONAL FEATURES Data list parameters Trouble codes with text descriptions Perform diagnostic tests Speed limit parameters Exhaust temperature monitoring English/Metric menu saves setting to PCMCIA card Snapshot recording Create custom data list DDEC III ENGINE FEATURES Displays the specific DDEC system type, including DDEC IV Increased half engine operation functionality Support of low gear torque limiting Supports cutout for natural gas engines Additional ESS transmission functionality Added total engine revolutions to the engine data menu Eaton Top 2 support added Support for optimized load Reset AFR learn table on natural gas engines New maintenance monitoring Monitor systems Perform diagnostic test Modify system/data DDEC MARINE APPLICATION FEATURES Supports marine controls version 2.0, 2.5, 3.0 Separated menus for marine controls specific parameters Marine engine parameters integrated with standard engine parameters Menu option allows for parameter names to switch from standard to marine descriptions Data list enhancements SERIES 638 FEATURES Print option added Data list Defect codes View codes Clear codes I/O status OPERATING SYSTEM ENHANCEMENTS Custom data list can be saved to PCMCIA Data list wrap Includes data freeze feature Snapshot trigger on any fault Faster and easier print function Side button 2 hot key Historic codes, print 2nd page data Print all ECM data Print 2nd screen data inactive faults More descriptive headings Application version number included Tool ID display enlarged Marine menu data list enhancements PN 802115 INCLUDES Application card ,Manual Requires these Cables 404024,408052,408028 or 408050 |
| PN 802214 MERITOR WABCO ABS DESCRIPTION APPLICATION CARD FOR THE MPC AND PRO-LINK PLUSSYSTEMS COVERED Meritor WABCO non-D, D and E Tractor ABS, Easy-Stop and Enhanced Easy-Stop trailer ABS The Meritor WABCO application software provides the technician with functions necessary to service the tractor and trailer ABS brake systems. To address advanced capabilities provided by Meritor WABCO, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Meritor WABCO. The following list contains all of the features and functions available with this card. KEY FEATURES Diagnostic data list PLC test application Read and clear fault codes Component tests Vehicle voltages ABS valves ATC valves ABS/ATC lamps Sensors Engine data link Retarder relay Retarder data link System setup TRAILER - EASY STOP AND ENHANCE EASY STOP PLC test application Read and clear fault codes Program ID Component tests Trailer voltages ABS valves Sensors System setup Service info (V300 Series) Tire calibration (V300 Series TRACTOR ABS "D" AND "E" PLC test application ,Read and clear fault codes ,Component tests ,Vehicle voltages ,ABS valves,ATC valves ,ABS/ATC lamps,ABS trailer lamp (PLC) ,Sensors,Engine data link,Retarder relay,Retarder data link System setup ,System info ,Tire calibration PN 802214 INCLUDES Application card, Manual Requires these Cables 404024,408028 or 408050 POWER LINE CARRIER (PLC) TEST APPLICATION1 FOR TRAILER ABS Effective March 2001, a Federal Government mandate required that heavy-duty trucks have an in-cab trailer ABS warning lamp. Using a new SAE standard called PLC communication, the change requires trailer ABS ECU’s to communicate with the tractor ECU via the J560 power line to activate the warning lamp. NEXIQ’s PLC Converter (sold separately) is also required for PLC communication. The PLC test application is easy to use and provides the ability to:Verify trailer ABS ECU for MID 10 and MID 11 messages. Toggle in-cab trailer ABS warning lamp ON/OFF to confirm operation. Test tractor and trailer coupled or trailer independently for MID messages. Requires NEXIQ PLC Converter Kit (PN 601020) |
| PN 808010 INTERNATIONAL NAVISTAR NAVPAK APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS SYSTEMS COVERED International electronic engine systems KEY FEATURES Displays diagnostic codes in Navistar or ATA format Programmed with simple menus to easily navigate technicians through a variety of diagnostic functions Perform diagnostic tests: Injector test Output state tests VSS tests Tachometer buffer test Wiggle wire test The service reprogramming function allows you to use the Pro-Link Plus to download information from the vehicle's ECM, send it by modem to Navistar and load the new command file into the vehicle's ECM View or reprogram selected operating parameters Snapshot modes for recording data triggered by any key, any trouble code, specific trouble code, specific SID or specific PID for capturing intermittent problems Displays parameter description and values in English or metric format Communications transfer function allows you to connect the Pro-Link Plus to a personal computer Printer output allows you to print data list, diagnostic codes, calibration data, service parameters or Snapshot data DATA DISPLAY FEATURES Rated horsepower Rated RPM Active codes/inactive codes Engine hours Miles Fuel usage Battery volts Engine oil temperature Ambient air Coolant level and temperature Idle set RPM Accelerator Engine RPM Boost PSI Barometric PSI Torque limit Engine load Injector control PSI Fuel gallons/hour Transmission shaft RPM Two speed axle Vehicle speed MPH Maximum speed MPH MPH limit Cruise control information Engine oil PSI PTO information Remote variable PTO Remote APS Retarder inhibit VPM information ECM version and checksum REPROGRAM THESE PARAMETERS Configuration options Start inhibit mode Retarder mode Exhaust back pressure Glow plug Cruise control Engine warning shutdown Engine/transmission selections Event engine hours Fuel, hours, miles Idle shutdown Overtemp protection Passwords and audits PTO control Road speed limiting Torque tailoring Speed calibration VIN and engine serial number VPM revision data PN 808010 INCLUDES Application card ,Manual Requires these Cables 404024,408028 or 408050 |
| PN 809105 ALLISON WTEC II/III
TRANSMISSION SYSTEMS APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS This unique diagnostic application is for use with Allison World Transmissions (models B-300, B-400, B-500 and the MD and HD transmissions). The application card also contains coverage for Allison’s Commercial Electronic Control (CEC 1) units on applicable MT, HT, V730, CLBT and DP models. KEY FEATURES Supports WTEC II/III and CEC I TCM’s Data list parameters Defined diagnostic codes/Clear Codes I/O wire status and shift inhibits General Purpose Inputs (GPI) defined View Customer Modifiable Constants (CMC) PN 809005 INCLUDES Application card, Manual Requires these Cables 404024,408050 PCMCIA UPDATE The Allison diagnostic PCMCIA card provides technicians with the
ability to quickly diagnose, and perform “action request” functions on
Allison World Transmission Electronic Control (WTEC) systems. The PCMCIA
card inserts into the Multi-Protocol Cartridge (MPC), which is used with
NEXIQ's Pro-Link Plus. Updates to any of NEXIQ's PCMCIA cards can be
performed by reflashing the card with the latest software via a floppy
disk from NEXIQ using a personal computer. |
| PN 809106 ALLISON WTEC II/III
TRANSMISSION SYSTEMS REPROGRAMMING APPLICATION CARD FOR THE MPC
AND PRO-LINK PLUS This application is compatible with WTEC systems used on B-300, B-400, B-500 models and the MD and HD transmissions. The application card also contains coverage for Allison’s Commercial Electronic Control (CEC 1) units on applicable MT, HT, V730, CLBT and DP models. KEY FEATURES Supports WTEC II/III and CEC I TCM’s Data list parameters Defined diagnostic codes/Clear Codes I/O wire status and shift inhibits General Purpose Inputs (GPI) defined View Customer Modifiable Constants (CMC) Reprogram transmission parameters REPROGRAM THE FOLLOWING Change the I/O state package number Enable and disable I/O wire states View and change Customer Modifiable Constants (CMCs) Change ECU password PN 809106 INCLUDES Application card ,Manual (Requires Allison Training Cert.) Requires these Cables 404024,408050 PCMCIA UPDATE |
| PN 809112 VOLVO VECTRO II APPLICATION CARD FOR THE MPC AND PRO-LINK PLUS SYSTEMS COVERED Volvo VECTRO II engine Volvo VECTRO II vehicle Volvo VECTRO II instrument cluster Volvo VECTRO II lamp driver Volvo VECTRO II SRS airbag 99 instrument cluster The Volvo VECTRO II application software provides advanced capabilities for the engine, chassis, instrument cluster, lampdriver and airbag To address advanced capabilities provided by Volvo, the MPC uses PCMCIA cards. The card is plugged into the back of the unit, and provides additional functions unique to Volvo. The following list contains all of the features and functions available with this card. KEY FEATURES Displays parameter values in English or Metric Custom data list provides the ability to create a custom data list from all application parameters (i.e. parameters from the engine and vehicle applications can be combined) Snapshot modes for recording data triggered by a specific diagnostic code, any diagnostic code, or any key APPLICATION FEATURES VECTRO II ENGINE Displays ECU information Displays EEPROM data Password-protected reprogram EEPROM function Performs compression testing and manual cylinder cutout test Displays diagnostic codes in Volvo format VECTRO II VEHICLE Displays ECU configuration information Displays diagnostic codes in Volvo format Displays EEPROM data Password-protected reprogram EEPROM function VECTRO II SRS AIRBAG Displays ECU configuration information Displays diagnostic codes in Volvo formatVECTRO II INSTRUMENT CLUSTER Displays ECU configuration information Performs interactive tests Performs gauge exercise tests Performs warning lamp, telltale warning, and icon tests Displays EEPROM data Reprogram EEPROM function VECTRO II LAMP DRIVER Displays ECU configuration information Displays diagnostic codes in Volvo format Performs interactive tests Performs warning lamp tests Print data to the Pro-Link Printer PN 809112 INCLUDES Application card ,Manual Requires these Cables 404024,408028 or 408050 |